Pcd boring tools for finishing Crankshaft hole
Processing principle of Pcd boring tools for finishing Crankshaft hole：
1. The distal end is first processed with a short guide bar knife, and then the other four gears are processed at one time with the distal hole as the support.
2. The machining center solution does not require a remote support bearing.
|
Parameter |
|
|
linear velocity Vc(m/min) |
250 |
|
Cutting tools diameter(mm) |
58 |
|
rotate speed (1/min) |
1373 |
|
Teeth number |
1 |
|
Feed per teeth fz(mm) |
0.1 |
|
Feed F(mm) |
137 |
|
cutting-in Ap(mm) |
-- |
