Welding of single crystal diamond cutting tools At present, there are three main welding methods commonly used, namely bonding method, inlay method and brazing method. Bonding The bondi
Learn More >
Titanium alloy is an alloy with Ti as the main component and contains elements such as aluminum, vanadium, iron, and manganese to improve its performance.According to different phase compositions, tit
Learn More >
Machinability of titanium alloys Under the same technological conditions (cutting speed 100-180 m/min, dry cutting), the main cutting force of Ti-6Al-4V and normalized 45 steel turning is equival
Learn More >
When using ceramic tools to process difficult-to-machine materials such as ordinary steel, cast iron, hardened steel, high manganese steel, nickel-based superalloys, powder metallurgy sintered parts,
Learn More >
Machining characteristics of single stroke honing reamer Single stroke honing reamer can process through the hole, blind hole, keyway hole, step hole, and other hole types. It is widely used in a
Learn More >
PCBN insert CNGA120408-2S Inspection before deliveryWorkpieces machined: Steel, HRC > 62Processing requirements: continuous cutting.Processing parameters: f=0.15 ~ 0.25mm/r, RPM: 140 ~ 180 rpm
Learn More >
PCBN tool cutting hardened steel material Problems we often encounter when machining hardened steel materials:1. The hardness of hardened steel is very high, and the processing efficiency is low.
Learn More >
Problems we often encounter when processing aluminum alloy materials:1. Low efficiency of processing2. Poor surface quality3. Short tool life4. Processing stability is not high At present, our co
Learn More >
