When the tool is cutting metal, especially when cutting steel continuously, the chips cannot be rolled up as they are. This is not because the chips are too hard, but because the length of the chips c...
Learn More >
The reamer is a cutting tool for semi-finishing and finishing of holes. The cutting allowance is very small. The cutting process is actually a combined action of cutting and squeezing, and the toleran...
Learn More >
Milling is performed by the rotation of the tool and the feed motion of the workpiece. At this time, the tip of the milling cutter draws a trajectory in the air called a trochoid. According to the mov...
Learn More >
End mills are the most common milling cutters. End mills are available in a wide variety of lengths, diameters, and types. A square end mill is used for most general milling applications. It produces ...
Learn More >
Vacuum welding of super-hard tools refers to the completion of the brazing action between the super-hard tool base and the cutter head by heating in a vacuum state. Like flame brazing and high-frequen...
Learn More >
Synthetic single crystal diamond is the material for making single crystal knife. Now it has reached a level comparable to natural diamond. There are two main synthetic methods: HPHT and CVD.
Learn More >
Suitable for monocrystalline silicon and quartz Ceramics, etc. are fragile and difficult to process Material drilling.
Learn More >
In order to process the workpiece reasonably and choose the milling cutter, it is necessary to analyze the shape, size, material hardness and other conditions of the workpiece.
Learn More >
