Ball nose end milling cutter is especially suitable for processing 3D contour shape, widely used in all kinds of curved surface, arc groove processing. Profile milling for high hardness materials up t...
Learn More >
How to solve the problem of difficult to cut high temperature alloys? 1.PCBN tools are more suitable for continuous cutting production machining of high-temperature alloys. 2.silicon-nitride ceramic...
Learn More >
Optimized for nickel-based superalloy engine parts. The finishing machining of aerospace parts is a challenging process that is performed under the extremely difficult to machine ISO S materials. N...
Learn More >
When machining hardened steel, the effect of turning instead of grinding can be played. Because the cutting depth is more than ten times larger than the grinding depth, the machining efficiency is hig...
Learn More >
Ⅰ、Flank wear Ⅱ、Crescent depression wear Ⅲ、groove wear Ⅳ、Plastic deformation V、hot crack Ⅵ、Flaking Ⅶ、Built-up edge
Learn More >
Reasonable selection of tool geometry can improve the processing conditions, save the processing time, improve the processing efficiency, ensure the quality of the machined workpiece and prolong the s...
Learn More >
(1) Causes of mechanical wear Tool wear occurs in a very short time when cutting difficult-to-machined materials, because there are many factors promoting tool wear in the machined materials. Most...
Learn More >
How to reduce the impact of tools deformation? 1. Tools overhang should be as short as possible. 2. The diameter of handle should be as large as possible. 3. The radial cutting force of the t...
Learn More >
