Small-diameter end mills are easy to break due to their low rigidity. The main reason is the jitter of the tool itself and the impact of the jitter of the clamping tool. In order to prevent breakag...
Learn More >
Insufficient cutting edge load may increase vibration caused by friction during cutting. Select a cutting edge that is larger than the tip radius to ensure a good cutting effect. Excessive cutting edg...
Learn More >
CBN tool turning rebar roll case: Workpiece: Steel Rebar Roll Materials of workpiece: high speed steel(HSS) Hardness: HSD80-85 Machining position: cylindrical surface and groove Machining type: r...
Learn More >
Compared with the traditional multi-axis machining, a higher accuracy of the ultra-precision turning, so the cutting tool path calculation is also put forward higher standard, main requirements includ...
Learn More >
Chemical Vapor Deposition (CVD) diamond coating has many excellent properties close to natural diamond, such as high hardness, high thermal conductivity, low friction and low expansion coefficient. It...
Learn More >
Machining center with end milling cutter mostly adopts spring clip set clip, when used in a cantilever state. Milling process, sometimes the end milling cutter from the tool holder gradually out, o...
Learn More >
The decision to repair a tool is influenced by the type, use, substrate and coating of the tool. Other factors include: the value of the workpiece, the life of the tool, the complexity of the process,...
Learn More >
Vibration is a common way of mechanical movement, which refers to the reciprocating movement of objects over time near the equilibrium position. Vibration also has a harmful side. During turning, vibr...
Learn More >
